From the range of different IP addresses, 192.168.0.2 is the 2nd IP address. The range of the IP addresses will be between 192.168.0.1 and 192.168.0.255. Then, the IP address code 192.168.0.3 is the 3rd IP address that falls in the aforementioned range. Few home networks using a Netgear router or a D-Link broadband router will make use of this particular range of IP addresses.
An administrator has the right to assign either 192.168.0.2 or 192.168.0.3 IP address to any of the devices present on the local network in a manual manner. On the other hand, the router itself has the ability to assign these IP addresses to the system in an automatic manner within the local network.
These two addresses are considered as the private IP addresses. The users can easily access them within a private network. There is no possibility to access these IP addresses from the public network. In general, the public IP addresses should be exceptional all over the complete internet network. That’s the reason, the private IP addresses need not have to remain unique. In this post, the readers can learn more about the IP addresses having the codes as 192.168.0.2 and 192.168.0.3. Check it out!
Also Check : 192.168.1.254 Login ID Password Here
Why 192.168.0.2 and 192.168.0.3 are Identical?
The 192.168.0.2 and 192.168.0.3 IP Addresses are frequently utilized on the private networks. This is because most of the routers are configured with the IP address 192.168.0.1 as a default IP address. For instance, the router that has a default IP address as 192.168.0.1 will assign the subsequent IP address available to different devices present in the network.
If in case, you are connecting your home network initially to the laptop then, it becomes the first device to get an IP address as 192.168.0.2. Following the laptop, if you connect the internet to a tablet then the router will immediately assign the IP address as 192.168.0.3. This is a continuous process for the remaining devices. However, it might not take place in all cases but most of the cases happen this way.
Assigning 192.168.0.2 and 192.168.0.3 Automatically
Whenever a router assigns the IP addresses as mentioned earlier then, such type of assignment is regarded as dynamic assigned. It is executed through DHCP protocol. A router comprises a plethora of addresses wherein the device can pick a router having an IP address as 192.168.0.1. It can eventually assign that specific IP address to other devices within the same network.
The range of the IP address that a router can assign to the devices starts from 192.168.0.1 to 192.168.0.255. The router doesn’t have any specific reason behind altering this sort of dynamic assignment [DHCP]. If in case, you have confronted some glitches in IP addresses assignment, the users can get the access to the console of router’s administrator. This lets the users assign an IP address to the device within a network exclusively.
Different routers can be accessed with much ease through the web interface that renders a method to personalize the settings of a router. This is regarded as the administrative console in maximum cases. If the router uses either 192.168.0.2 or 192.168.0.3 IP address, just enter it into the URL address bar of the browser as follows:
http://192.168.0.2 or http://192.168.0.3
The router will initiate the administrative console and sends a request for the username or the password combination. Most of the routers transmit with a default username as admin or sometimes none. In general, the default passwords are user, password, 1234 or none. When you access the administrative console, you can easily view all the available devices in the network. This lets the users optimize the assigned IP address based on your preference. For the user, there must be the administrative console for the router to access the device.